Lucebra
Lucebra Biznes
IT i oprogramowanie/Sprzęt komputerowy/Arduino

Automatyzacja inteligentnego domu z Arduino

Tạo Nhà Thông Minh Của Bạn Sử Dụng Dự Án Arduino

Wszystkie poziomy • 25 Wykłady • Dożywotni dostęp
Educational Engineering Team

Sprawdzony Mistrz Instruktor

Tự động hóa nhà thông minh với Arduino
PRZYCZEPA
Poznaj swojego instruktora: Educational Engineering Team

19 ms

5.0 / 5.0
Globalna ocena
1
Aktywni studenci
Angielski amerykański
Napisy w 99 językach
3 godz. 3 min
Całkowita zawartość

Czego się dowiesz

Cơ bản Arduino: Hiểu biết về cơ sở của phần cứng và phần mềm Arduino để khởi động các dự án tự động hóa nhà của bạn.
Tích hợp mô-đun: Học cách tích hợp các mô-đun khác nhau như LED, cảm biến (PIR, LDR), RFID, và hơn thế nữa để tạo ra các hệ thống nhà thông minh phản ứng nhanh.
Lập trình cho tự động hóa: Viết và gỡ lỗi mã Arduino để điều khiển và tự động hóa môi trường nhà của bạn.
Phát triển dự án: Phát triển và triển khai các dự án nhà thông minh từ đầu đến cuối, bao gồm điều khiển đèn, cải thiện bảo mật, và giám sát môi trường.

Treść kursu

2 sekcji • 25 wykłady • 03:03:51 długość całkowita

Introduction

03:37

Unboxing the kit

06:40

Controller Board

04:26

LED Module explained

04:33

LED Module with the ESP32

04:06

Button Module explained

07:45

Button Module Simple Project

06:24

PIR Motion sensor explained

06:11

PIR Motion Sensor Simple Project

03:39

LDR explained

06:29

LDR Simple Project

04:15

Laser Module explained

03:53

Laser Module Code

02:29

Raindrop Sensor Explained

02:35

Servo Motor Explained

08:13

Servo Motor Simple Project

02:57

DHT-11 Sensor Explained

06:32

DHT-11 Sensor Code

03:03

12C LCD Module Explained

06:29

LCD with the DHT-11 project

04:36

RFID Module Explained

05:48

RFID with Servo project

06:57

Voice Recognition Module Explained

05:14

Assembly and Testing

36:16

Bonus Lecture

30:29
Tygodniowy Plan Nauki
Zaplanuj swoją naukę
AI tworzy spersonalizowany harmonogram na podstawie dostępności

Wymagania

Bộ bắt đầu Arduino: Một bộ cơ bản bao gồm bảng điều khiển Arduino và các thành phần khác nhau như cảm biến, LED, và dây.
Kỹ năng kỹ thuật cơ bản: Thân thuộc với điện tử cơ bản và sử dụng máy tính. Kinh nghiệm lập trình trước là hữu ích nhưng không bắt buộc vì khóa học bao gồm cơ sở của lập trình Arduino.
Cài đặt phần mềm: Khả năng cài đặt phần mềm trên máy tính, vì bạn sẽ cần sử dụng Arduino IDE để lập trình bảng điều khiển của mình.

Grupa docelowa

DIY Enthusiasts: Individuals looking to enhance their home with automation technologies.

Technology Students: College or university students studying electronics, computer science, or engineering who require practical experience with IoT and automation technologies.

Hobbyists in Electronics: Anyone with an interest in building electronic projects and learning more about how they can automate everyday tasks and appliances at home.

Professionals in Technology: Engineers and tech professionals seeking to broaden their expertise in hardware programming and smart home solutions.

O tym kursie

Khám phá sức mạnh của tự động hóa nhà với khóa học của chúng tôi, "Tự động hóa nhà thông minh với Arduino" Được thiết kế cho những người đam mê ở mọi cấp độ kỹ năng, khóa học này sẽ dẫn bạn qua các yếu tố cơ bản của việc sử dụng Arduino để phát triển và thực hiện các ứng dụng nhà thông minh khác nhau. Từ điều khiển đèn sử dụng mô-đun LED đến các tính năng bảo mật tiên tiến sử dụng cảm biến chuyển động và RFID, khóa học này trang bị cho bạn các kỹ năng cần thiết để tạo ra một môi trường sống thông minh và phản ứng nhanh hơn.


Mỗi bài học được cấu trúc để xây dựng sự hiểu biết và kỹ năng của bạn dần dần. Bắt đầu với cơ sở của bảng điều khiển Arduino, bạn sẽ tìm hiểu cách tương tác với các mô-đun khác nhau, tích hợp chúng, và cuối cùng, lập trình và triển khai các hệ thống nhà thông minh. Tới cuối khóa học, bạn sẽ có chuyên môn để thiết kế và triển khai các giải pháp nhà thông minh tùy chỉnh phù hợp với nhu cầu của bạn.


Những gì bạn sẽ học được:


  • Cài đặt và cấu hình: Bắt đầu với việc thiết lập môi trường Arduino của bạn và khám phá khả năng của nó cho tự động hóa nhà.
  • Tích hợp cảm biến: Sử dụng các cảm biến khác nhau như cảm biến ánh sáng (LDR), cảm biến chuyển động (PIR), và cảm biến môi trường (DHT-11) để thu thập dữ liệu và tự động hóa phản ứng.
  • Điều khiển thiết bị: Học cách điều khiển các thiết bị nhà như đèn, động cơ, và các thiết bị điện tử khác một cách liền mạch với Arduino.
  • Tính năng nâng cao: Đi sâu vào các chức năng nâng cao bao gồm RFID cho hệ thống bảo mật và nhận diện giọng nói cho điều khiển không cần tay.
  • Triển khai dự án: Hiểu các bước cần thiết để tích hợp và kiểm tra hệ thống nhà thông minh của bạn để đảm bảo độ tin cậy và hiệu quả.


Tính năng của khóa học:


  • 24 Bài học chi tiết: Mỗi video cung cấp các thông tin về các thành phần, cài đặt của chúng và tích hợp chúng vào hệ thống nhà thông minh.
  • Dự án thực hành: Các dự án thực tế sau mỗi mô-đun giúp bạn áp dụng những gì đã học vào các tình huống thực tế.
  • Tài nguyên có thể tải xuống: Truy cập vào các đoạn mã, sơ đồ mạch và hướng dẫn cài đặt để hỗ trợ bạn qua từng giai đoạn của dự án của bạn.
  • Cộng đồng tương tác: Kết nối với những người học khác để chia sẻ thông tin, giải quyết vấn đề và hợp tác trong các dự án.
Możliwości Kariery i Stanowiska Docelowe

Zdobądź praktyczne umiejętności i kwalifikuj się na kluczowe stanowiska na świecie

Program Gotowy do Pracy
Stanowiska, na które możesz aplikować

Embedded Systems Engineer

IoT Firmware Developer

Automation & SCADA Engineer

PCB & Circuit Layout Designer

Szacowane Wynagrodzenie Roczne
$85,000 – $135,000 / yr
Globalne Zapotrzebowanie Rynkowe

Top 5% Growing Engineering Segment

Kluczowe Umiejętności, które Zdobędziesz
Microcontroller Architecture
Hardware-Software Integration
Industrial Protocols & Fieldbus Comms
Schematic & Circuit Diagnostics
* Szacunki oparte na globalnych raportach płacowych branży technologicznej.
Poznaj swojego instruktora
Educational Engineering Team
5.0 Ocena
98 Studenci
Plan osobisty Lucebra
Educational Engineering Team
Główny Instruktor
Educational Engineering Team is a Leading Team in Microcontroller Industry, with over 13 Years of Experience in Teaching and Doing Practical Projects.

Educational Engineering Team is a group of skilled engineers dedicated to sharing practical knowledge with learners worldwide. Founded by Ashraf Said Al-Madhoun, the team has worked in programming, microcontrollers, electronics, and engineering education since 2007.

Rather than offering superficial explanations, the team breaks down complex topics into clear, step-by-step lessons supported by practical projects and bite-sized videos. This hands-on approach helps learners understand technical concepts and apply them directly to their studies, careers, and personal projects.

Ashraf is a Mechatronics Engineer, educator, author, electronics and programming enthusiast, and maker. As Chief Educational Engineer, he specializes in explaining challenging concepts in a simple, structured, and accessible way. He has extensive teaching experience and has authored four books about microcontrollers.

Educational Engineering Team has created more than 100 online courses covering circuit design, electronics simulation, PCB fabrication, Arduino, PIC microcontrollers, Raspberry Pi, C, Python, PLC programming, industrial automation, 3D design, ESP boards, embedded systems, and the Internet of Things.

In addition to producing courses, bootcamps, articles, and tutorials, the team supports electronics and programming enthusiasts, STEM students, educators, and aspiring engineers. Its members also provide engineering consultation and guidance for student graduation projects, helping learners develop practical skills and prepare for careers in the technology industry.

...
Więcej kursów prowadzonych przez
Educational Engineering Team

Studenci też kupili

Uczniowie, którzy oglądali ten kurs, zapisali się również na te najwyżej oceniane kursy

Program ESP32 without Coding
BEZPŁATNY
Tendencia
IT i oprogramowanie | Sprzęt komputerowy

Program ESP32 Board without writing a single code in A Professional Environment

5.0
2 godz. 30 min
18 wykłady
Wszystko
BEZPŁATNY
Zacznij teraz
Using Al to Code: Your Step-by-Step Guide
IT i oprogramowanie | Sprzęt komputerowy

Revolutionize Your Coding Skills with Al: A Comprehensive Guide for Beginners

5.0
2 godz.
11 wykłady
Wszystko
$10.99

$19.99

ISO 27001 Certification Process – A Step-by-Step Guide
IT i oprogramowanie | Bezpieczeństwo Informacji

Master ISO 27001: Achieve Certification, Build Security, and Ensure Compliance for Your Organization

5.0
1 godz. 30 min
10 wykłady
Początkujący
$39.99

$54.99

Implement GRC (Governance, Risk, Compliance) Step by Step
IT i oprogramowanie | Certyfikat w zakresie zarządzania, ryzyka i zgodności (CGRC)

Master GRC: Step-by-Step Guide to Implementing Governance, Risk, and Compliance for Business Success

5.0
2 godz. 30 min
35 wykłady
Mediator
$39.99

$64.99

Mastering Arduino Data Streaming to Excel
IT i oprogramowanie | Arduino

Seamlessly Stream and Visualize Real-Time Data from Arduino into Excel with Ease

5.0
1 godz. 30 min
6 wykłady
Wszystko
$9.99

$34.99

Blogger: Make A Professional Website For Free With No Coding
IT i oprogramowanie | Inne IT i oprogramowanie

Learn how to create and customize a website with no prior coding experience.

5.0
1 godz. 30 min
12 wykłady
Wszystko
$9.99

$19.99

Frequently Bought Together

Learners who enrolled in this course also frequently purchased these complementary courses together.

7-Day Money Back Guarantee for all bundle items

Total price for selected items:

$75.98

$94.97

🎉 Save 20% when bought together

Często zadawane pytania

Znajdź odpowiedzi na najczęściej zadawane pytania dotyczące tego kursu.

Tak! Po ukończeniu 100% wykładów i zadań w ramach kursu możesz natychmiast pobrać zweryfikowany cyfrowy certyfikat ukończenia bezpośrednio ze swojego profilu Lucebra.

Odkryj więcej w Technology

Rozwiń swoją naukę dzięki akredytowanym certyfikatom, e-bookom i interaktywnym lekcjom na żywo.