Lucebra
Lucebra Besigheid
Ontwerp/3D en animasie

SOLIDWORKS कोर्स: 2D स्केच को 3D मॉडल में बदलें

पार्ट्स के लिए 3D मॉडल बनाने, विभिन्न भागों को इकट्ठा करने और उनके बीच गति बनाने के लिए सीखें।

Alle Vlakke • 14 Lesings • Lewenslange Toegang
Educational Engineering Team

Geverifieerde Meester Instrukteur

SOLIDWORKS कोर्स: 2D स्केच को 3D मॉडल में बदलें
SLEEPWA
Ontmoet jou instrukteur: Educational Engineering Team

19 ms

5.0 / 5.0
Globale gradering
1
Aktiewe studente
Engels (Verenigde State van Amerika)
99 Tale Onderskrifte
1 uur 14 min
Totale inhoud

Wat jy sal leer

स्केच बनाएं
पार्ट्स बनाएं और असेंबली बनाएं
कॉन्फ़िगरेशन के साथ अपने भागों के विभिन्न संस्करण बनाएं और नियंत्रित करें
समीकरणों के साथ डिज़ाइन संशोधन को स्वचालित करें

Kursusinhoud

4 afdelings • 14 lesings • 01:14:14 totale lengte

Introduction

01:20

SolidWorks Components - Parts Asseblies Drawings

02:34

Let's Begin! Starting SolidWorks

05:22

SolidWork Explorer Tab Explained

04:27

SolidWork Toolbars Explained

05:33

SolidWork Exercise

13:16

SolidWork Exercise - Continue

08:45

Handfull Shortcuts

02:37

3D Views Tab

03:49

Second Exsercise

05:33

Assemblies

06:12

Motion Study

03:38

Drawing

05:18
Weeklikse Studieplan
Beplan jou leerreis
KI skep n persoonlike skedule gebaseer op jou beskikbaarheid

Vereistes

SolidWorks डाउनलोड करें

Teikengehoor

Anyone interested in 3D Design and Simulation

3D Geeks and Fans

Engineers

Inventors and Designers

Oor hierdie kursus

SOLIDWORKS उत्पाद विकास और डिज़ाइन के लिए 3D सॉफ़्टवेयर का विश्व नेता है। SOLIDWORKS के साथ, आप विनिर्माण-तैयार भागों और असेंबली, साथ ही विस्तृत ड्रॉइंग और सामग्री की सूची बना सकते हैं।


आपको यह कोर्स क्यों लेना चाहिए?



  • यह कोर्स शुरुआती लोगों के लिए है, इसलिए CAD या मॉडलिंग सॉफ़्टवेयर का कोई पूर्व ज्ञान नहीं चाहिए।
  • विषयों में 2D स्केच से डिज़ाइन करना और मॉडलिंग सॉफ़्टवेयर का उपयोग करके उन स्केच से 3D मॉडल बनाना शामिल है।
  • ज्यामिति खींचना, ज्यामिति को आयाम देना, ठोस ज्यामिति बनाना और स्केच प्लेन का उपयोग करना जैसे महत्वपूर्ण कौशल सीखें।
  • आप सीखेंगे कि 2D स्केच को 3D मॉडल में कैसे बदला जाए।
  • इस कोर्स में फिल्मों और मॉडल उदाहरणों जैसे कई संसाधन शामिल हैं।


सतत अपडेट 1000 से अधिक छात्र!!! धन्यवाद!!!


इस कोर्स में आपका स्वागत है।


यह कोर्स आपको 3D मॉडलिंग में शून्य अनुभव से लेकर पेशेवर तक ले जाएगा जो 3D भागों और असेंबली बना सकते हैं और उन्हें उत्पादन-तैयार विनिर्माण ड्रॉइंग में बदल सकते हैं। यह SOLIDWORKS एसेंशियल्स कोर्स किसी भी नए SOLIDWORKS उपयोगकर्ता के लिए प्रोत्साहित किया जाता है। चाहे आपने 2D CAD, किसी अन्य 3D सिस्टम से माइग्रेट किया हो, या CAD के साथ कोई अनुभव नहीं हो, यह कोर्स आपके लिए उपयुक्त है। प्रोग्राम के बहुत मूल बातों से शुरू करते हुए, कोर्स सॉफ़्टवेयर के दैनिक उपयोग के लिए आवश्यक मॉडलिंग एसेंशियल्स को देखकर विकसित होता है, कुछ उन्नत विषयों के लिए स्वचालन डिज़ाइन के माध्यम से।


यह कोर्स पैकेज के 2D ड्रॉइंग पहलू पर भी ध्यान केंद्रित करता है, ड्रॉइंग शीट्स सेट करना, ड्रॉइंग व्यू बनाना और आयाम योजनाएं लागू करना गहराई से। कंपनी-विशिष्ट आवश्यकताओं के लिए ड्रॉइंग बॉर्डर को कस्टमाइज़ करने में समय बिताया जाता है।


जल्दी से गति प्राप्त करके और सर्वोत्तम मॉडलिंग प्रथाओं का उपयोग करके, SOLIDWORKS एसेंशियल्स कोर्स अंततः सभी SOLIDWORKS उपयोगकर्ताओं के लिए अधिकतम दक्षता और उत्पादकता सुनिश्चित करता है। नए CAD उपयोगकर्ता, अन्य CAD सिस्टम के अनुभवी उपयोगकर्ता और अनुभवी SOLIDWORKS उपयोगकर्ता सभी एसेंशियल्स प्रशिक्षण से लाभान्वित हो सकते हैं। प्रक्रियाओं को चित्रित करने के लिए वास्तविक जीवन के केस स्टडी का उपयोग किया जाता है, भागों और असेंबली के मॉडल बनाने और उन भागों और असेंबली के ड्रॉइंग बनाने के लिए आपको जानने के लिए सब कुछ सिखाता है।


इस कोर्स में, हम छात्रों को SOLIDWORKS में विनिर्माण-तैयार भागों और असेंबली बनाने के लिए दिखाएंगे। हम सरल 2D स्केचिंग और सॉफ़्ट से शुरू करेंगे

Ontmoet jou instrukteur
Educational Engineering Team
5.0 Gradering
97 Studente
Bekyk volle profiel
Educational Engineering Team
Hoofinstrukteur
Educational Engineering Team is a Leading Team in Microcontroller Industry, with over 13 Years of Experience in Teaching and Doing Practical Projects.

Educational Engineering Team is a group of skilled engineers dedicated to sharing practical knowledge with learners worldwide. Founded by Ashraf Said Al-Madhoun, the team has worked in programming, microcontrollers, electronics, and engineering education since 2007.

Rather than offering superficial explanations, the team breaks down complex topics into clear, step-by-step lessons supported by practical projects and bite-sized videos. This hands-on approach helps learners understand technical concepts and apply them directly to their studies, careers, and personal projects.

Ashraf is a Mechatronics Engineer, educator, author, electronics and programming enthusiast, and maker. As Chief Educational Engineer, he specializes in explaining challenging concepts in a simple, structured, and accessible way. He has extensive teaching experience and has authored four books about microcontrollers.

Educational Engineering Team has created more than 100 online courses covering circuit design, electronics simulation, PCB fabrication, Arduino, PIC microcontrollers, Raspberry Pi, C, Python, PLC programming, industrial automation, 3D design, ESP boards, embedded systems, and the Internet of Things.

In addition to producing courses, bootcamps, articles, and tutorials, the team supports electronics and programming enthusiasts, STEM students, educators, and aspiring engineers. Its members also provide engineering consultation and guidance for student graduation projects, helping learners develop practical skills and prepare for careers in the technology industry.

...

Studente het ook gekoop

Leerders wat hierdie kursus bekyk het, het ook vir hierdie top-gegradeerde kursusse ingeskryf

SOLIDWORKS Course: Turn 2D Sketches into 3D Models
Ontwerp | 3D en animasie

Learn Creating 3D Models for parts, assemble different parts and make motion between them.

5.0
1 uur 30 min
13 lesings
Alles
$19.99
Complete 3D Printing Guide: Binder Jetting for Construction
Ontwerp | 3D Druk

Learn construction binder jetting, materials, CAD design, and quality control.

5.0
3 uur
25 lesings
Intermediêr
$12.99
Complete 3D Printing Guide: Industrial Applications of Additive Manufacturing
Ontwerp | 3D Druk

Master 3D printing fundamentals, FDM, SLA, SLS, DMLS, industrial applications, rapid prototyping, production workflows, quality control, and additive manufacturing case studies.

5.0
3 uur 30 min
26 lesings
Intermediêr
$9.99
Master Canva (III): Boost Creativity with AI-Powered Design
Ontwerp | Canva AI-ontwerpnutsgoed

Unlock AI features in Canva to design, teach, and sell effectively for your business.

5.0
1 uur
19 lesings
Deskundige
$12.99

$54.99

Graphics Expert: Advanced Photoshop and GIMP
Ontwerp | Grafiese Ontwerp en illustrasie

Develop your graphic design skills by mastering the advanced features of Both Photoshop and GIMP

5.0
1 uur 30 min
29 lesings
Alles
$9.99

$74.99

The Complete Drawing & Sketching Masterclass: Beginner to Pro in 30 Days
Ontwerp | Tekening

Learn pencil control, lines, shapes, forms, shading, proportions, perspective, and still-life sketching through a practical 30-day beginner drawing journey.

5.0
3 uur 30 min
4 lesings
Beginner
$34.99

$49.99

Frequently Bought Together

Learners who enrolled in this course also frequently purchased these complementary courses together.

7-Day Money Back Guarantee for all bundle items

Total price for selected items:

$34.38

$42.97

🎉 Save 20% when bought together

Gereelde Vrae

Vind antwoorde op die mees algemene vrae oor hierdie kursus.

Ja! Nadat u 100% van die kursuslesings en opdragte voltooi het, kan u onmiddellik u geverifieerde digitale Sertifikaat van Voltooiing direk vanaf u Lucebra-profiel aflaai.

Verken meer in Tegnologie

Brei jou leerreis uit met geakkrediteerde sertifikate, e-boeke en interaktiewe regstreekse klasse.