Lucebra
Lucebra Besigheid
IT en Sagteware/Hardeware/Arduino

Arduino Su Seviyesi Kontrol Cihazı ile Otomatik Su Pompası

Bir yüzer sensör kullanarak bir tanktaki su seviyesini ölçmeyi ve bir pompayı kontrol etmek için bir röle kullanmayı öğrenin

Alle Vlakke • 7 Lesings • Lewenslange Toegang
Educational Engineering Team

Geverifieerde Meester Instrukteur

Arduino Su Seviyesi Kontrol Cihazı ile Otomatik Su Pompası
SLEEPWA
Ontmoet jou instrukteur: Educational Engineering Team

19 ms

5.0 / 5.0
Globale gradering
1
Aktiewe studente
Engels (Verenigde State van Amerika)
99 Tale Onderskrifte
1 uur 6 min
Totale inhoud

Wat jy sal leer

Bu Arduino kursu, su seviyesi düştüğünde otomatik olarak bir su pompasını açabilen bir su seviye kontrol cihazı yapmayı öğretecektir. Bileşenleri birbirine nasıl bağlayacağınızı ve sistemi çalıştırmak için Arduino'yu nasıl kodlayacağınızı öğreneceksiniz. Projeniz için doğru bileşenleri nasıl seçeceğinizi ve her şeyi doğru şekilde nasıl bağlayacağınızı öğreneceksiniz. Su seviye kontrol cihazınızı oluşturduktan sonra, onu özel ihtiyaçlarınıza göre programlayabileceksiniz.

Kursusinhoud

1 afdelings • 7 lesings • 01:06:11 totale lengte

Introduction

01:47

Circuit Design

16:18

Requirements and Explanation

05:24

Coding

14:28

Discussion

11:24

Project Demonstration

04:28

Circuit Building

12:20
Weeklikse Studieplan
Beplan jou leerreis
KI skep n persoonlike skedule gebaseer op jou beskikbaarheid

Vereistes

su pompası

arduino kartı

tel

Teikengehoor

This Arduino course will teach you how to make a water level checker that can automatically turn on a water pump when the water level gets low.

This course is perfect for anyone who wants to learn how to use Arduino to automate their home or garden, and it's also great for people who are interested in learning about electronics and programming.

This course is suitable for beginners

This course is perfect for anyone who wants to learn how to use an Arduino to automate a simple task.

Oor hierdie kursus

Merhaba, ben Ashraf. Bu kurs, size bir Arduino su seviye kontrol cihazını otomatik su pompası ile nasıl yapacağınızı öğretecek. Yüzer sensör kullanarak bir tanktaki su seviyesini nasıl ölçeceğinizi ve bir pompayı nasıl kontrol edeceğinizi öğreneceksiniz. Ayrıca, gerektiğinde pompayı otomatik olarak açıp kapatmak için bir eskiz nasıl yazılacağını öğreneceksiniz.


Kurs Genel Bakışı:


Bu Arduino Su Seviye Kontrol Cihazı ile Otomatik Su Pompası kursu, size bir Arduino kullanarak bir su seviye kontrol cihazı yapmayı öğretecek. Yüzer şalteri kullanarak su seviyesini nasıl ölçeceğinizi ve bir su pompasını nasıl kontrol edeceğinizi öğreneceksiniz. Bu kurs, Arduino'yu basit bir görevi otomatikleştirmek için kullanmayı öğrenmek isteyen herkes için mükemmeldir.


Bu Kursu Neden Almalısınız:




  • Görevleri Otomatikleştirmeyi Öğrenin: Bu, Arduino'yu görevleri otomatikleştirmek için kullanmayı öğrenmek isteyen herkes için harika bir projedir.
  • Elde Deneyim: Otomatik su pompalı bir su seviye kontrol cihazı yapmayı öğreneceksiniz.
  • Pratiğe Dayalı Uygulama: Bir tanktaki su seviyesini ölçmek ve seviye düştüğünde bir su pompasını açmak için Arduino'yu nasıl kullanacağınızı öğreneceksiniz.
  • Hata Ayıklama Becerileri: Bu kursu aldıktan sonra, bir şeyler ters giderse projenizi sorun giderimin ve hata ayıklayabileceksiniz.


Neler Öğreneceksiniz:



  • Otomasyon için Arduino Kullanımı: Arduino'yu görevleri otomatikleştirmek için nasıl kullanacağınızı anlayacaksınız.
  • Yüzer Sensör Entegrasyonu: Bir tanktaki su seviyesini ölçmek için bir yüzer sensör kullanmayı öğreneceksiniz.
  • Röle Kontrolü: Bir su pompasını kontrol etmek için röle kullanımını ustalaştıracaksınız.
  • Arduino ile Kodlama: Su seviyesine göre su pompasını otomatikleştirmek için bir eskiz yazacaksınız.
  • Proje Oluşturma: Otomatik su pompalı eksiksiz bir su seviye kontrol cihazı oluşturacaksınız.


Kurs Faydaları:



  • Arduino ile Kodlama: Arduino Su Seviye Kontrol Cihazı ile kodlamayı ve devre oluşturmayı kolayca öğrenebilirsiniz. Bu ürün, kodlama ve devre yapımına başlamak isteyenler için mükemmeldir.
  • Sulama Programınızı Otomatikleştirin

    Bu Arduino kursu, su seviyesi düştüğünde otomatik olarak bir su pompasını açabilen bir su seviye kontrol cihazı yapmayı öğretecektir.

    Bileşenleri birbirine nasıl bağlayacağınızı ve sistemi çalıştırmak için Arduino'yu nasıl kodlayacağınızı öğreneceksiniz.

    Projeniz için doğru bileşenleri nasıl seçeceğinizi ve her şeyi doğru şekilde nasıl bağlayacağınızı öğreneceksiniz.

    Su seviye kontrol cihazınızı oluşturduktan sonra, onu özel ihtiyaçlarınıza göre programlayabileceksiniz.

Loopbaangeleenthede & Teikenposte

Bou praktiese, werksgereed vaardighede en kwalifiseer vir gesogte poste wêreldwyd

Werkgereed Kurrikulum
Poste waarvoor jy kan aansoek doen

Embedded Systems Engineer

IoT Firmware Developer

Automation & SCADA Engineer

PCB & Circuit Layout Designer

Beraamde Jaarlikse Salaris
$85,000 – $135,000 / yr
Wêreldwye Bedryfsvraag

Top 5% Growing Engineering Segment

Sleutelvaardighede wat jy Bemeester
Microcontroller Architecture
Hardware-Software Integration
Industrial Protocols & Fieldbus Comms
Schematic & Circuit Diagnostics
* Skatting gebaseer op globale tegnologie-werwingsmaatstawwe en salarisverslae.
Ontmoet jou instrukteur
Educational Engineering Team
5.0 Gradering
98 Studente
Bekyk volle profiel
Educational Engineering Team
Hoofinstrukteur
Educational Engineering Team is a Leading Team in Microcontroller Industry, with over 13 Years of Experience in Teaching and Doing Practical Projects.

Educational Engineering Team is a group of skilled engineers dedicated to sharing practical knowledge with learners worldwide. Founded by Ashraf Said Al-Madhoun, the team has worked in programming, microcontrollers, electronics, and engineering education since 2007.

Rather than offering superficial explanations, the team breaks down complex topics into clear, step-by-step lessons supported by practical projects and bite-sized videos. This hands-on approach helps learners understand technical concepts and apply them directly to their studies, careers, and personal projects.

Ashraf is a Mechatronics Engineer, educator, author, electronics and programming enthusiast, and maker. As Chief Educational Engineer, he specializes in explaining challenging concepts in a simple, structured, and accessible way. He has extensive teaching experience and has authored four books about microcontrollers.

Educational Engineering Team has created more than 100 online courses covering circuit design, electronics simulation, PCB fabrication, Arduino, PIC microcontrollers, Raspberry Pi, C, Python, PLC programming, industrial automation, 3D design, ESP boards, embedded systems, and the Internet of Things.

In addition to producing courses, bootcamps, articles, and tutorials, the team supports electronics and programming enthusiasts, STEM students, educators, and aspiring engineers. Its members also provide engineering consultation and guidance for student graduation projects, helping learners develop practical skills and prepare for careers in the technology industry.

...

Studente het ook gekoop

Leerders wat hierdie kursus bekyk het, het ook vir hierdie top-gegradeerde kursusse ingeskryf

Program ESP32 without Coding
GRATIS
IT en Sagteware | Hardeware

Program ESP32 Board without writing a single code in A Professional Environment

5.0
2 uur 30 min
18 lesings
Alles
GRATIS
Begin nou
Using Al to Code: Your Step-by-Step Guide
IT en Sagteware | Hardeware

Revolutionize Your Coding Skills with Al: A Comprehensive Guide for Beginners

5.0
2 uur
11 lesings
Alles
$10.99

$19.99

ISO 27001 Certification Process – A Step-by-Step Guide
IT en Sagteware | Inligting Sekuriteit

Master ISO 27001: Achieve Certification, Build Security, and Ensure Compliance for Your Organization

5.0
1 uur 30 min
10 lesings
Beginner
$39.99

$54.99

Implement GRC (Governance, Risk, Compliance) Step by Step
IT en Sagteware | Gesertifiseer in bestuur, risiko en nakoming (CGRC)

Master GRC: Step-by-Step Guide to Implementing Governance, Risk, and Compliance for Business Success

5.0
2 uur 30 min
35 lesings
Intermediêr
$39.99

$64.99

Mastering Arduino Data Streaming to Excel
IT en Sagteware | Arduino

Seamlessly Stream and Visualize Real-Time Data from Arduino into Excel with Ease

5.0
1 uur 30 min
6 lesings
Alles
$9.99

$34.99

Blogger: Make A Professional Website For Free With No Coding
IT en Sagteware | Ander IT & Sagteware

Learn how to create and customize a website with no prior coding experience.

5.0
1 uur 30 min
12 lesings
Alles
$9.99

$19.99

Frequently Bought Together

Learners who enrolled in this course also frequently purchased these complementary courses together.

7-Day Money Back Guarantee for all bundle items

Total price for selected items:

$75.98

$94.97

🎉 Save 20% when bought together

Gereelde Vrae

Vind antwoorde op die mees algemene vrae oor hierdie kursus.

Ja! Nadat u 100% van die kursuslesings en opdragte voltooi het, kan u onmiddellik u geverifieerde digitale Sertifikaat van Voltooiing direk vanaf u Lucebra-profiel aflaai.

Verken meer in Tegnologie

Brei jou leerreis uit met geakkrediteerde sertifikate, e-boeke en interaktiewe regstreekse klasse.